Unix‎ > ‎Solaris‎ > ‎Solaris man pages‎ > ‎1m‎ > ‎


     lufslist - list configuration of a boot environment

     /usr/sbin/lufslist [-l error_log] [-o outfile] BE_name [-X]

     The lufslist command is part of a  suite  of  commands  that
     make  up  the  Live Upgrade feature of the Solaris operating
     environment. See live_upgrade(5) for a  description  of  the
     Live Upgrade feature.

     The lufslist command  lists  the  configuration  of  a  boot
     environment  (BE).  The output contains the disk slice (file
     system), file system type, and file system size for each  BE
     mount point. The output also notes any separate file systems
     that belong  to  a  non-global  zone  inside  the  BE  being

     The following is an example of lufslist output, which  shows
     a  separate  filesystem  for  the zone, zone1, within the BE
     being displayed.

       # lufslist BE_name
       Filesystem                fstype       size(Mb) Mounted on
       /dev/dsk/c0t0d0s1         swap           512.11 -
       /dev/dsk/c0t4d0s3         ufs           3738.29 /
       /dev/dsk/c0t4d0s4         ufs            510.24 /opt

                     zone zone1 within boot environment BE_name
       /dev/dsk/c0t4d0s7         ufs           7000.48 /export

     File system type can be ufs, swap, or vxfs,  for  a  Veritas
     file  system.  Under  the  Filesystem  heading can be a disk
     slice or a logical device, such as a disk metadevice used by
     volume management software.

     The lufslist command requires root privileges or the Primary
     Administrator role.

     The lufslist command has the following options:

     -l error_log    Error  and  status  messages  are  sent   to
                     error_log,  in  addition  to  where they are
                     sent in your current environment.

     -o outfile      All command output is sent  to  outfile,  in
                     addition to where it is sent in your current

     -X              Enable XML output.  Characteristics  of  XML
                     are       defined       in      DTD,      in
                     where <num> is the version number of the DTD

     BE_name    Name of the BE for which file systems are  to  be
                reported.   You  cannot  specify  a  BE  that  is
                involved in another Live Upgrade operation.

     The following exit values are returned:

     0     Successful completion.

     >0    An error occurred.


         list of BEs on the system


         Live Upgrade DTD (see -X option)

     See attributes(5) for descriptions of the  following  attri-

    |       ATTRIBUTE TYPE        |       ATTRIBUTE VALUE       |
    | Availability                | SUNWluu                     |

     luactivate(1M), lucancel(1M),  lucompare(1M),  lucreate(1M),
     lucurr(1M),     ludelete(1M),     ludesc(1M),    lumake(1M),
     lumount(1M),  lurename(1M),   lustatus(1M),   luupgrade(1M),
     lutab(4), attributes(5), live_upgrade(5), zones(5)

Man pages from Solaris 10 Update 8. See docs.sun.com and www.oracle.com for further documentation and Solaris information.